Sens2B
Sensor to Business
100% Sensors, Detectors

& Measurement Devices

   
 Sens2B - Sensors & Measurement Homepage
 
English pages Deutsche Seiten Pages en Français Páginas en Español Pagine in Italiano

 

Welcome to the world of measurement & sensors technology. Read up-to-date measurement & sensors technology news and search for worldwide manufacturers, suppliers of sensors, detectors & measuring devices.

Search Sensor & Measurement Suppliers & News
- Access to the main pages -


The Sensor to Business - sensors & measurement database:
Find sensor manufacturers, sensor suppliers and suppliers of measuring devices in the following categories:

Applications, measured properties:

Other categories

Suppliers of sensors & measurement devices by country

Sensor & measurement suppliers by region. Find all measuring devices & sensor manufacturers, international sales offices, local sensor technology representatives and distributors listed by country / regions.


Sensors & Measurement news:



Sensor & Measurement news in other languages

 
 

Top-7 Sensors & Measurement News

 

Find all sensor & measurement suppliers & news
- Access to the database -

 
 

Sens2B - Sensor to Business
100% Sensors, Instruments & Measuring Devices

The International Sensors, detectors & measurement Portal
Manufacturers and suppliers of sensors & measurement devices

Sensors & measurement news

and technical articles
in week 41/2008:


The new electromechanical NC joining module NCFT for extremely small joining forces
 
electromechanical NC joining module NCFT even for extremely small joining forcesKistler: When assembling small and miniature components such as small bearings in housings or delicate gears in miniature gearing, a crucial factor is dynamic operation with very exact positioning and extremely high repeatability levels despite extremely small joining forces. The new electromechanical NC joining module NCFT Type 2157A... with the proven Kistler system design and integrated force-displacement monitoring combines joining movement and quality control in one operation. With integral piezoelectric force sensor technology and a nominal joining force of 1 kN, the new NC joining module is suitable for both automated precision mechanical manufacture and also single workplaces requiring high dynamics and sensitivity, and at the same time very compact size. With the extremely high repeatability level of 0,005 mm and a speed of up to 300 mm/s, it is designed for the highest precision with fast cycles and short  ...





+ Info

Ultra-compact WIKA Transducers for Ultra-pure Media
 
WIKA WUC-1X UHP transducer familyThe new WIKA WUC-1X UHP transducer family offers more space in installations with ultra-pure media and special gas systems. The three available variants – WUC-10 (single-end), WUC-15 (flow through) and WUC-16 (modular surface mount) – are notable for their extraordinarily compact design. Among the further outstanding features are the IP67 high-level ingress protection and the active temperature compensation. These also make the WUC transducers ideally suited for outdoor applications, such as tank farm installations, ensuring high process reliability equally with high temperature fluctuations or icing. In comparison with conventional transducers, the WUC-1X family offers a new, patented design as well as the possibility of adjusting the zero offset externally. The - also patented - sealed-access zero potentiometer prevents both the ingress of humidity and any inadvertent adjustment. ...





+ Info

Testing time for vacuum cleaner maker
 
Digital TorqSense transducer from Sensor Technology LtdSensor Technology Ltd: A company that designs and build custom test equipment for the manufacturing and research industries has developed a cost saving sub-system that allows eight dynamometer test rigs to share a single calibration unit based on a Digital TorqSense transducer from Sensor Technology Ltd. The company, 1st Pass of Westbury in Wiltshire, started out as a regional systems integrator for National Instruments’ LabView software packages. However, it quickly realised that there was a considerable need for a wider service encompassing all aspects of test rig design and build. Founder and Managing Director, Chris Turner, explains: “Engineers involved in either research or quality control need test rigs, but designing them is not their forte. They tend to focus only on the immediate requirements so tend towards inflexible, mono-functional designs. Six months later when new requirements emerge, they have to build another rig”. ...





+ Info

Novel CO2 Sensors for Closed Circuit Rebreathers
 
Synkera Technologies, Inc. is currently developing solid-state, conductiometric sensors for monitoring carbon dioxide (CO2) under a SBIR Phase I grant from NOAA. The focus of the funded work is the development of small, low-power sensors to be included in the breathing loop of closed circuit rebreathers that can monitor for a breakthrough of the CO2 scrubbing system. The inclusion of a CO2 sensor in closed circuit rebreathers will make the dive equipment safer and allow for more widespread use. The initial SBIR effort is the development of sensors and electronics and will be followed-up by the integration of the sensors into rebreathers for testing of prototype units. Due to significant cost advantages, it is anticipated that the devices will expand CO2 sensing for applications served by currently available technology, primarily infrared (IR) sensors, and open up new sensing opportunities. A particular area that these novel sensors are expected to impact is demand control ventilation (DCV). These new solid-state sensors are expected to demonstrate performance comparable to IR sensors currently used in cost sensitive applications. Fabrication of the sensors in a unique surface mount geometry is ideal for integration with electronic components, allowing for very small sensing modules. The CO2 sensors will have the following unique characteristics ...





+ Info

Diaphragm in-line seals, now with all aseptic process connections
 
Diaphragm in-line sealsFor applications needing to fulfil the highest hygienic demands, the WIKA 981.51 diaphragm in-line seal is now available with all process connections to DIN 11864. In addition to both threaded pipe and flanged connections, sterile, standard-compliant connections for instruments are now also realisable in the form of a clamp connection (DIN 11 864-3). WIKA uses 1.4435 stainless steel as a standard material for wetted parts. In addition, special materials such as 1.4539 stainless steel or Hastelloy are also available. The 981.51 diaphragm seal is particularly suited to applications in the pharmaceutical and food industries as well as for painting lines. This patented WIKA diaphragm in-line seal is notable due to its circular cylindrical construction, enabling it to be mounted directly into the pipeline and making it self-draining. With the sterile connections, and in conjunction with the measuring instrument, a dead-space free and crevice free measurement ...





+ Info

Michell acquires Coreci relative humidity business
 
Michell acquired the relative humidity business of the Italian Control and Automation company, Gefran SPA. Originally the business, located in Lyon, France, was known as Coreci S.A. It was taken over by Gefran in 1998. For 25 years, Coreci has been a major force in the relative humidity market, with a reputation for high quality relative humidity sensors and advanced electronics. The Coreci operation will continue to operate and develop in Lyon as a division of Michell SARL, (Paris, France). This acquisition strengthens Michell’s position as a leader in the field of humidity and moisture sensing and, in combination with the technologies and strengths of our sister company Rense Instruments, will enable us to offer the widest range of competitively priced relative humidity products with high performance specification. ...





+ Info

Now also available in 48 x 48 mm format – JUMO dTRON 300 plast
 
JUMO dTRON 300 plastThe highly successful JUMO dTRON 300 plast series of controllers has a new version, the JUMO dTRON 316 in 48 x 48 mm format. The mounting depth of the instrument is only 90 mm. This expansion means that there are now three device formats available to the plastics industry. All three versions have the requisite functionality for plastics extrusion or injection molding applications. The simple, user-friendly pattern of operation is made even easier by the brilliant and backlit, multicolor LCD display. You only need the four keys on the front panel to operate, parameterize and configure the instrument, or you can use the convenient setup program. The instrument is designed so that even the basic version of the controller has the most important functions relevant to the plastics industry. Available as standard on the controller are ...





+ Info
 

Sensors & Measurement News in week 40 '2008    <<   >>  Sensors & Measurement News in week 42 '2008


 

Top-7 Sensors & Measurement News

 

Find all sensor & measurement suppliers & news
- Access to the database -

 
 
 
 

 

 

 

Copyright © Sens2B International
Sens2B - Sensor to Business

Sens2B - Sensor to Business is the international measurement technology and sensor suppliers directory / sensors portal. Sens2B - Sensor to Business does not manufacture or sell any sensors or measuring devices. You will find in Sens2B - Sensor to Business database international sensor companies, international manufacturers, suppliers and distributors of all kind of sensors, transducers, transmitters, measurement instruments, devices, probes, meters and detectors.

Powered by Sens2B - WebDesign

***

Sensors: English / Sensoren: Deutsch / Capteurs: Français / Sensores: Español / Sensori: Italiano
Top-7-News: English (sensors) / Top-5-News: Deutsch (Sensoren) / Top-5-News: Français (capteurs)
About us / Contact us / Conditions of use / Registration / Newsletter / Sensor Categories Overview
Partners & Links / Sens2B- Sensor Suppliers Extension & Sensor Reports