Sens2B
Sensor to Business
100% Sensors, Detectors

& Measurement Devices

   
 Sens2B - Sensors & Measurement Homepage
 
English pages Deutsche Seiten Pages en Français Páginas en Español Pagine in Italiano

 

Welcome to the world of measurement & sensors technology. Read up-to-date sensors & measurement technology news and search for worldwide manufacturers, suppliers of sensors, detectors & measuring devices.

Search Sensor & Measurement Suppliers & News
- Access to the main pages -


The Sensor to Business - sensors & measurement database:
Find sensor manufacturers, sensor suppliers and suppliers of measuring devices in the following categories:

Applications, measured properties:

Other categories

Suppliers of sensors & measurement technology by country

Sensor & measurement suppliers by region. Find all measuring devices & sensor manufacturers, international sales offices, local sensor technology representatives and distributors listed by country / regions.


Sensors & Measurement news:



Sensor & Measurement news in other languages

 
 

Top-7 Sensors & Measurement News

 

Find all sensor & measurement suppliers & news
- Access to the database -

 
 

Sens2B - Sensor to Business
100% Sensors, Instruments & Measuring Devices

The International Sensors, detectors & measurement Portal
Manufacturers and suppliers of sensors & measurement devices

Sensors & measurement news

and technical articles
in week 30/2008:


Amplifier improves solar panel production
 
digiCLIP amplifier with force transducerThe production of photovoltaic modules for solar panels can now be improved by using a measuring chain comprising HBM’s digiCLIP amplifier with a force transducer. Photovoltaic modules use large quantities of small silicon wafers. These need to be produced in large quantities to exacting standards. During this process the silicon is normally cut into wafers using wire saws. Optimal force application of the wire saws on the silicon is essential to precise cutting and minimal loss of material. digiCLIP permanently acquires the force signals and transmits the signals to the production control system through Profibus-DP within a few milliseconds. During the process digiCLIP evaluates any variations and enables immediate correction through the control system. . ...





+ Info

New sealed linear transducer for rugged industrial applications
 
contactless sealed linear transducerPenny + Giles has launched a new contactless sealed linear transducer that provides reliable, fit-and-forget position sensing for rugged industrial applications. The robust SLT190 is aimed primarily at the off-highway (construction, agriculture) and utility vehicle markets and is suitable for the harsh conditions of steering position applications, lift mechanisms, and hydro-pneumatic active suspension systems. This transducer has a short body to stroke length ratio for compact dimensions making it ideal as a replacement for existing linear potentiometers whilst providing a significant cost saving over equivalent stroke inductive transducers. The SLT190 provides a range of 14 different strokes between 25 and 500 mm. It uses proven inductive technology, with no electrical sliding contacts, and as a result, has a virtually limitless life. It provides reliable, absolute analogue position measurement with an infinite resolution. ...





+ Info

ManuWare Software – for Easy Setup of Industrial Charge Amplifier and Transmitter Parameters
 
ManuWare user interface: connected instruments, instrument status and test measurement curves at a glanceKistler sensors and piezoelectric measuring amplifiers offer great versatility essential for use in modern, flexible manufacturing. For quite some time this has been achieved by consistently equipping new Kistler products with a computer interface allowing comprehensive parameter configuration. The new ManuWare software now provides Kistler customers with a multi-purpose tool for setting the parameters of the modern ICAM industrial charge amplifiers and the new generation of transmitters quickly and easily. On connection to the PC these instruments are identified with an AutoScan function and listed in the program with their status clearly shown. Instrument groups can be structured as a project. Dialogs tailored to each particular instrument make parameter configuration very intuitive. A graphical display of the test measurements and auxiliary functions for scaling indirect measurement help the user set up force measurement applications. ...





+ Info

New sensor signal conditioning module costs less than £35
 
sensor signal conditioning modulePenny + Giles has launched a new high-performance, low-cost, sensor signal conditioning module for any sensor that produces a 0-5Vdc output signal. The SSC unit, which retails in the UK for less than £35 for OEM quantities, is housed in an IP68 rated rugged metal enclosure and is suitable for OEMs wanting to convert sensor output voltage signals to a 4-20mA current signal. The SSC is easy to use and features many options for a flexible-set up. As a result it suits a variety of applications, for example transmitting the output signal of a rotary position sensor linked to a steam valve in a power generating plant, over a long distance to a control room. SSC reliably converts a sensor’s output voltage signal to a 4-20mA (or optional 5-19mA) current output, or by using additional module cards, into a variety of different voltage formats or a digital pulse width modulated output. The SSC module also provides a 5Vdc source that may be used as a supply for many types of sensor, including potentiometers, contactless position transducers, tilt sensors, pressure transducers and load cells. ...





+ Info

Safety Sensors keep goal!
 
Safety Sensors keep goal!Leuze: GOALIAS – that’s the name of the latest innovation project at the IAS, the Institute for Automation and Software Engineering at the University of Stuttgart. Leuze electronic participated in this project as a cooperation and development partner for the necessary opto-electronic safety sensor technology. GOALIAS is an automated goalkeeper that can even stop the penalties of the German premier division club, VfB Stuttgart. To do this it has to be able to cover the entire 7.32 m wide and 2.44 m high goal. It has just 400 ms to detect the ball, calculate the point of impact in the goal, and then get there in time. GOALIAS requires sophisticated image recognition, a high performance motor, and Leuze electronic’s reliable safety sensor technology to make all this happen. ...





+ Info

Low Cost OEM Pressure Sensors Ideal for a Wide Variety of Industrial Applications
 
Low Cost OEM Pressure SensorsMoorpark, CA – Kavlico, a global business unit of Custom Sensors & Technologies (CST) and an operation of Schneider Electric, has recently introduced the Models P4055/P4056 OEM Pressure Sensors. These devices have a piezo-resistive sense element and the P4050 is available in pressure ranges of 0-3 through 0-300 psi gage, sealed gage, and absolute while the P4056 is available in measurement ranges of 0 - 200 mBar through 20 Bar. The rugged, brass sensors are compatible with many types of liquid and gaseous media. Small in size (40 grams max.), the P4055/P4056 have a built-in Metri-Pack 150 electrical connector. Operating on 5 Vdc, the sensors provide a 0.5 to 4.5 Vdc output proportional to pressure. Pressure port options include NPT, G 1/4, M10, and M12. The temperature compensated sensors exhibit exception EMI/RFI performance and can tolerate high vibration environments. The sensors have a total error band is ...





+ Info

Small and Reliable Intrinsically Safe Dew Point Transmitter for CNG applications
 
Intrinsically Safe Dew Point TransmitterRecently developed by Michell Instruments, the Easidew TX I.S. Transmitter offers a minimal footprint while maintaining exceptional performance and reliability. The new transmitter can be connected in a 2-Wire loop powered or 3-Wire configuration. It features a white HDPE sinter, designed to provide a visual indication of sensor contamination. The new sintered guard provides protection to less than 10 micron and is impermeable to liquids. The Easidew TX I.S. is certified by ATEX and FM Approvals for use in hazardous areas. The certification lists five different galvanic isolators and allows customers to choose the most suitable isolator for their own on-site requirements. This intrinsically safe transmitter has powerful processing capability allowing for the first time, the on-board calculation of ppm(v) moisture content in selectable ranges from 0 to 3000ppm...





+ Info

New capacitive measurement system with sub-nanometre resolution
 
capacitive measurement systemOnly a short time after introducing its new single-channel measurement systems, Micro-Epsilon is now offering a new capacitive multi-channel measurement system, which guarantees extremely high resolution and accuracies. According to the manufacturer, the new capaNCDT500 provides a resolution in the range of hundredths of a nanometre and supersedes the existing capaNCDT600 series. An Ethernet port with 24-bit resolution is available, so that data obtained can be output as error-free as possible. The new system is modular in its design and can accept up to eight measuring channels, depending on requirements. For this, the controllers, in all the major European card formats, are inserted in the housing. A version with an integrated preamplifier, as well as one with an external preamplifier, are available, which enables cable lengths of up to 20m between sensor and controller. The sensors operate virtually independent of temperature and so can be used at ...





+ Info

High Quality Pressure Solution
 
Pressure Sensors PMP300FUTEK Advanced Sensor Technology, Inc has expanded its Pressure Sensor product line yet again by adding the new model: Pressure Sensor PMP300 to its line up. This marks the second pressure sensor release for FUTEK in 2008. The PMP300 Pressure Sensor (OEM) is precision engineered and manufactured to fit many industrial and OEM pressure measurement applications. The rugged design provides resistance to vibration, shock, wide temperature variations, RFI and other extreme environmental conditions that are typical of industrial and OEM applications. Performance and reliability is enhanced by the all stainless steel welded measuring cell that eliminates the need for soft sealing material that may deteriorate over time. The state-of-the-art manufacturing and assembly process increases the long term reliability of the PMP300. Typical applications process control and automation, hydraulics, pneumatics, and machine controls. ...





+ Info
 

Sensors & Measurement News in week 29 '08    <<    >>    Sensors & Measurement News in week 31 '08


 

Top-7 Sensors & Measurement News

 

Find all sensor & measurement suppliers & news
- Access to the database -

 
 
 
 

 

 

 

Copyright © Sens2B International
Sens2B - Sensor to Business

Sens2B - Sensor to Business is the international measurement technology and sensor suppliers directory / sensors portal. Sens2B - Sensor to Business does not manufacture or sell any sensors or measuring devices. You will find in Sens2B - Sensor to Business database international sensor companies, international manufacturers, suppliers and distributors of all kind of sensors, transducers, transmitters, measurement instruments, devices, probes, meters and detectors.

Powered by Sens2B - WebDesign

***

Sensors: English / Sensoren: Deutsch / Capteurs: Français / Sensores: Español / Sensori: Italiano
Top-7-News: English (sensors) / Top-5-News: Deutsch (Sensoren) / Top-5-News: Français (capteurs)
About us / Contact us / Conditions of use / Registration / Newsletter / Sensor Categories Overview
Partners & Links / Sens2B- Sensor Suppliers Extension & Sensor Reports